HPM 7000 Ton Hydraulic Press
Condition: Very Good
Fast Traverse Platen Press, Vertical Down Acting-Open Rod Type with Closed Top Pedestal Type Bed.
Platen Guided on 4 Columns with 360 Degree Split Bronze Bearings.
Ram Diameters: Main ram: 74”
(2) Pullback Rams: 21” x 18”
Pressing Surfaces: Platen at Sides 54” x 72”
Bed at Sides: 54” x 115”
Platen & Bed at Ends: 72” x 144”
Clearance between rods: 54” x 72”
Daylight Space, Between Surfaces: 44”
Max Travel: 28”
Ram Speeds, Inches/ Min
Closing: 238
Pressing: 8.6
Opening: 238
Accumulated Cycle Time: (building pressure, reversing etc. at max pressure & travel) 10.7 seconds/ cycle
(1) Column Nut is missing
We have pictures of the press's disassembly and can email you a link to photos upon request. ssmith@aamachinery.com
Drawings available
Previously used to manufacture airplane parts.
Pressing Members: Platen- actuated by one single-acting main ram and two double acting booster pullback rams.
Pressure is applied to area of main ram and forward area of both auxiliary ram simultaneously.
Subject To Prior Sale
